-
Phone
86-571-87169872
-
Address
No.388, Xilin Avenue, Jinbei Community, Linan City, Zhejiang Province, Hangzhou, Zhejiang, China
-
E-mail
LatestProducts
Cobalt-Base Stellite 6 Hardness Welding Rod/Electrode/Wire
China Cobalt-Base Stellite 6 Hardness Welding Rod/Electrode/Wire, Find details about China Electrode, Welding from Cobalt-Base Stellite 6 Hardness Welding Rod/Electrode/Wire - Lin An Da Yang Welding Material Co., Ltd.
Description
Basic Info
- Model NO.: Stellite 6
- Material: Tungsten
- Length: 350mm
- Electrode Coating Type: Titanium Calcium
- Welding Power: AC or DC+
- Transport Package: 5kg/Box, 20kg/Carton
- Type: L (Low Temperature Low Alloy Steel Electrode)
- Diameter: 3.2/4.0/5.0mm
- Welding Core Type: Cobalt Chromium Tungsten Alloy Cores
- Slag Characteristic: Alkaline
- Trademark: Ocean Welding
- Origin: Zhejiang, China(Mainland)
Product Description
Cobalt-base Stellite 6 Hardness welding rod/electrode/wire
is a titanium calcium type coating, surfacing electrode with cobalt chromium tungsten alloy cores, should adopt DCRP. Surfacing metal can keep good abrasion resistance and corrosion resistance at 650 degrees.
Applications:
used in the work of 650 degrees Celsius should be able to maintain good wear resistance and a certain degree of corrosion resistance of the occasion; for example, the high temperature and high pressure welding valve and hot shear knife, the impact of hot and cold staggered place.
Chemical Composition of the deposited metal
Electrode specification and reference current (AC or DC+):
Notes:
1: before welding electrode must be 150 degrees bake for 1 hours
2: according to the size of the tool and the type of parent material, must be preheated by 300-600 DEG C, should use small current short arc welding
3: after welding should be tempered at 600-700 DEG C after 1 hours and then cold or immediately put the workpiece into the dry and hot sand box or plant ash in the cold, so as not to crack.
Contact Us:
TEL:86 0571 87169872
is a titanium calcium type coating, surfacing electrode with cobalt chromium tungsten alloy cores, should adopt DCRP. Surfacing metal can keep good abrasion resistance and corrosion resistance at 650 degrees.
Applications:
used in the work of 650 degrees Celsius should be able to maintain good wear resistance and a certain degree of corrosion resistance of the occasion; for example, the high temperature and high pressure welding valve and hot shear knife, the impact of hot and cold staggered place.
Chemical Composition of the deposited metal
| Alloy | Nominal Analysis of Welding Electrode | Other | UNS | ASME/AWS | Hardness(HRC) | |||||||
| Co | Cr | W | C | Ni | Mo | Fe | Si | |||||
| Cobalt Base Alloy Bare Welding Electrodes | ||||||||||||
| Stellite1 | Bal. | 32 | 12 | 2.45 | ≤3 | ≤1 | ≤3 | ≤2 | ≤0.5 | R30001 | (SF)A5.21 ERCoCr-C |
51-56 |
| Stellite6 | Bal. | 30 | 4-5 | 1.2 | ≤3 | ≤1 | ≤3 | ≤2 | ≤0.5 | R30006 | (SF)A5.21 ERCoCr-A |
40-45 |
| Stellite12 | Bal. | 30 | 8 | 1.4-1.8 | ≤3 | ≤1 | ≤3 | ≤2 | ≤0.5 | R30012 | (SF)A5.21 ERCoCr-B |
46-51 |
| Stellite20 | Bal. | 33 | 16 | 2.45 | ≤3 | ≤1 | ≤3 | ≤2 | ≤0.5 | - | - | 53-59 |
| Stellite21 | Bal. | 28 | - | 0.25 | 3 | 5.2 | ≤3 | ≤1.5 | ≤0.5 | R30021 | (SF)A5.21 ERCoCr-E |
28-40* |
| Stellite22 | Bal. | 28 | - | 0.3 | 1.5 | 12 | ≤3 | ≤2 | ≤0.5 | - | - | 41-49* |
| Stellite25 | Bal. | 20 | 14 | 0.1 | 10 | ≤1 | ≤3 | ≤1 | ≤0.5 | - | - | 20-45* |
| Stellite31 | Bal. | 26 | 7.5 | 0.5 | 10 | - | ≤2 | ≤1 | ≤0.5 | R30031 | - | 20-35* |
| StelliteF | Bal. | 26 | 12 | 1.7 | 22 | ≤1 | ≤3 | ≤2 | ≤0.5 | R30002 | (SF)A5.21 ERCoCr-F |
40-45 |
| Stellite107 | Bal. | 31 | 4 | 2 | 24 | - | ≤2 | ≤3 | ≤0.5 | - | - | 38-47 |
| Stellite190 | Bal. | 27 | 13.5 | 3.2 | ≤1 | ≤1 | ≤3 | 1 | ≤0.5 | R30014 | (SF)A5.21 ERCoCr-G |
54-59 |
| Stellite250 | Bal. | 28 | - | 0.1 | - | - | 21 | ≤1 | ≤0.5 | - | - | 20-28 |
| Stellite306 | Bal. | 25 | 3 | 0.5 | 6 | - | 4 | 1 | 6%Nb | - | - | 32-42* |
| Stellite694 | Bal. | 28 | 19 | 1 | 5 | - | ≤3 | 1 | 1&V | - | - | 48-54 |
| Alloy | Nominal Analysis of Welding Electrode | Others | UNS | ASME/AWS | Hardness(HRC) | |||||||
| Co | Cr | W | C | Ni | Mo | Fe | Si | |||||
| Cobalt Base Alloy Bare Welding Electrodes | ||||||||||||
| Stellite706 | Bal. | 31 | - | 1.2 | ≤3 | 4 | ≤3 | ≤1 | ≤1 | - | - | 39-44 |
| Stellite712 | Bal. | 31 | - | 1.5/1.9 | ≤3 | 8 | ≤3 | ≤2 | ≤1 | - | - | 46-51 |
| ULTIMET | Bal. | 26 | 2 | 0.06 | 9 | 5 | 3 | - | ≤1 | R31233 | - | 28-45* |
Electrode specification and reference current (AC or DC+):
| Diameter(mm) | 3.2 | 4.0 | 5.0 |
| Length(mm) | 350 | 350 | 350 |
| Current(A) | 120-160 | 140-190 | 150-210 |
Notes:
1: before welding electrode must be 150 degrees bake for 1 hours
2: according to the size of the tool and the type of parent material, must be preheated by 300-600 DEG C, should use small current short arc welding
3: after welding should be tempered at 600-700 DEG C after 1 hours and then cold or immediately put the workpiece into the dry and hot sand box or plant ash in the cold, so as not to crack.
Contact Us:
TEL:86 0571 87169872
